Following is a list of the most commonly asked questions about femooi Facial Cleanser Ada. If you are unable to find the answer to your question on this list, please call or email our customer service hotline for more information.
The self-lock mode is enabled, simultaneously press the “Cleansing button” and the “Massage button” for 2 seconds to disable the self-lock mode. The internal temperature of the device too high, and the device entered the temperature protection mode. Before trying again, please place the device aside for a period of time until the temperature dropped back to room temperature. The battery is empty, please charge the device. The microprocessor encountered a brief operational error. Please connect the charging cable and place the device on the wireless charging dock to reset the device to its initial state.
The heating and cooling functions are used too frequently. Because the heating and cooling modes consume a large amount of power, the battery can release a high amount of energy, resulting in a hot temperature. It is recommended to pause using the device for a while, before trying again.
Under normal circumstances it will not be moldy. It is recommended to wipe it after each cleansing cycle, and then to put it on the charging stand to dry it naturally.
Yes, after cleansing you can hold the device under streaming water to clean it. The device is tested under IPx7 water resistance rating, and there are no openings in the device that can let water in.
Just shake the water off or wipe the device and place it on the charging stand. The device charging stand is designed to allow the device to dry quickly.
Discontinue use immediately. Although the silicone of the device is highly durable, it may degrade under certain conditions of non-normal use. Consult the full manual “Maintenance” section for how to prevent this.
The device is not placed vertically into the wireless charging dock. The device is not placed correctly, please refer to the “Product Placement” section in the full manual. The DC charging plug or the power plug are not connected. The battery is completely exhausted and requires to be charged for a few minutes before it shows the light indicator again. When charging for the first time, or when frequently using the heating and cooling function, the device might be in standby mode and temporarily fail to charge.
No, the lithium-ion battery is built-in, it can’t be replaced, it can only be charged.
It takes approximately 4-5 hours to charge the battery from an fully exhausted state to a fully charged state.
No, it will not. The lithium-ion battery supports cyclic charging, and it does not matter if the device is used in the middle of charging.
When the device is fully charged, in standby mode it can last 180 days; when only cleansing or massage modes are used, it can last for more than 3 months; when cleansing plus massage modes are used, it can last for 1-2 months; when heating or cooling are used, it can last for 3-5 days.
The cleansing function consumes about 1% of the power in a single use; the massage function consumes about 1% of the power in a single use; the heating/cooling function consumes about 15%-20% of the power in a single use.
When the device is charging, the indicator light will display a breathing pulse, which will flash on and off. Be sure to ensure that the body is placed correctly on the charging stand.
When the device is placed on the charging, and the indicator light is steady on, it is fully charged.
Because each device is tested in the factory, the device is already partly charged. The 5-hours charging time refers to the time required from a completely empty battery to fully charged.
Yes, the device is suitable for all skin types. However, it is recommended for sensitive skin types to first use the device with the lowest vibration setting and only use it once every 1-2 days. After making sure there are no problems and the skin adapted, you can increase the frequency.
Yes, the device is a purely mechanical device. There are no sources of infrared or other, and therefore can be used with confidence.
By using the hot temperature, dark circles and eye bags under the eyes can be eliminated; the cold temperature can help to eliminate fatigue and swollen areas.
The battery level is low or exhausted. Due to the high-power consumption of the heating and cooling functions (about 15%-20% for a single use), it must be used when the power is sufficient. It is recommended to charge the device to full capacity before using the heating and cooling modes. The microprocessor encountered a brief operational error. Please connect the charging cable and place the device on the wireless charging stand to reset the device to its initial state. If the outside temperature is extremely hot or cold, it may affect the heating or cooling functions of the device. It is recommended to use the device at a suitable temperature (between 5°C and 28°C).
The peak temperature of the heating function is 40 degrees. After testing, this temperature is the lowest temperature that can effectively remove dark circles. Because the skin of the eye is sensitive, the sudden change to a temperature of 40 degrees will cause a stress reaction. It is recommended that the dual-temp head is placed on the skin immediately after the heating mode is turned on, and the temperature change will be more gradual.
No, all the colors have the same properties. The device is suitable for all skin types, you can choose the color you like.
Yes, the heating mode helps to open the pores and promotes the absorption capabilities of the skin.
Yes, the materials are absolutely safe. femooi uses advanced ABS plastics, all our suppliers provide complete qualifications and test reports.
Most of the acne, blackheads, oils and the like are caused by not washing your face thoroughly. So as long as you clean your face every time, with the use of some skin care products, there can be positive effects.